New fixture request BeamZ 288

Beam for Live
1

Hi there. I’m needing the fixture for the BeamZ 288

https://manuals.plus/beamz/lcb288-wash-strobe-rgbw-manual.pdf

Thank you!

2

Hi Oli, welcome to the forum. To request fixture profiles, please go through the steps described in this topic. Thank you for your understanding!

3

Hello,

Here are the fixture profiles for the 6-ch and 64-ch modes of your fixture:
beamZ LCB288 Wash Strobe - 6ch.sbf (1.3 KB)
beamZ LCB288 Wash Strobe - 64ch.sbf (2.5 KB)

To control the light in 64-ch mode, set up your Beam patch and Live Set as following:

  1. Add the fixture to your patch, don’t assign any tag to it just yet.

  2. Double-click on the fixture to expand its components.

  3. Select only the RGB Pixels and give them a tag such as Strobe RGB.

    image
    image1880×1634 189 KB

  4. Select only the White Pixels and give them a tag such as Strobe White.

  5. In Live, use a separate Par device to control the Strobe RGB segments and Strobe White segments.

If you need profiles for any other channel mode, please submit a request via the link @Jean-Paul shared.